Robot handoff
Pick this route when the conveyor must land a part at a fixed pickup point before robot work or vision inspection begins.
- Best for indexed transfer cells.
- Best when station-to-station timing is the hard part.
KNK automation motion
Precision Link Conveyor for Indexed Automation Cells
A precision link conveyor and chain link conveyor system can keep robot handoff points, dwell timing, and station-to-station movement aligned in one motion path.
Repeatability0.05mm indexed positioning
SpeedUp to 1000mm/s operating speed
Load40kg cumulative load
Conveyor Snapshot
Use the repeatability, speed, load, and application areas to decide whether the K80 conveyor should sit at the center of your indexed motion plan.
| Product family | KS Series Chain Link Conveyor System |
|---|---|
| Positioning | Repeat positioning accuracy can reach 0.05mm, with no secondary positioning required. |
| Speed | Maximum operating speed is 1000mm/s. |
| Load | Cumulative load can reach 40kg. |
| Core role | Conveying and positioning in one motion path for automation cells. |
| Maintenance note | Modular selection, maintenance-free operation, and low overall cost. |
| Application areas | 3D printing, food packaging, dispensing machines, conveying and feeding, laser equipment, industrial automation, and vending machines. |
| Contact path | [email protected] / +86 18102947625 |
- Use it when the transfer point must stay fixed. The 0.05mm figure matters when a robot, camera, or downstream station needs the same stop every cycle.
- Use it when speed and load both matter. The 40kg load reference supports fixture and part-carrier discussions without turning the line into a light-duty demo.
Decision path
Choose The Motion Problem First
These three checks break the conveyor decision into the exact questions most integrators ask before they wire the line.
Repeated stops
Use this route when the line pauses often and dwell time must stay predictable while the part waits for the next action.
- Best for cyclical assembly or inspection.
- Best when a stop must repeat without drift.
Maintenance boundary
Use this route when service access, integration limits, and safety boundaries must be drawn before the conveyor is installed.
- Best for teams planning the full cell layout.
- Best when maintenance time matters as much as cycle time.
Custom Linear Module K60N - Linear Actuator Manufacturers
Use this when the next motion step is compact linear travel rather than indexing conveyor motion.
IP68 Dustproof KTH40 - Linear Module - Linear Guide Actuator
Use this when protection, environment control, and axis motion all need to work together.
KETH10 150kg Linear Module - Linear Guide Actuator
Use this when a heavier axis stage is part of the same motion plan.
Custom Indexing Conveyor System Selection For Robot Handoff And Vision Inspection
Use this when a fixed transfer point has to line up with a robot or inspection step before the next action starts.
Ks Series Chain Link Conveyor System For Repeated Stops And Controlled Dwell Times
Use this when the line stops many times and dwell behavior must stay consistent from cycle to cycle.
Precision Link Conveyor Safety Boundaries For Maintenance And System Integration
Use this when maintenance access and integration boundaries need to be settled before installation.
FAQ
Six Questions Buyers Usually Ask
What is the KS series precision link conveyor meant to do?
It combines conveying and positioning in one motion path for indexed automation cells, robot handoff, and station-to-station transfer.
What repeatability and speed should I plan around?
Plan around 0.05mm repeat positioning accuracy and 1000mm/s maximum operating speed.
How much load can it carry?
Use 40kg as the cumulative load reference, with a rigid and reliable structure.
Which automation settings does it fit?
It fits discussions around 3D printing, food packaging, dispensing machines, conveying and feeding, laser equipment, industrial automation, and vending machines.
What should I send for an RFQ?
Send the station layout, target stop positions, load, cycle timing, and whether the conveyor must coordinate with robot or vision steps.
How do I contact sales?
Use [email protected] or +86 18102947625.